Showing posts with label Printing. Show all posts
Showing posts with label Printing. Show all posts

Tuesday, July 12, 2011

Tips to Understand the Terms Used in Printing and Newsprint Production

With the onset of the computer age, finding a way to use printers more accurately has become the task of those who want to get clear and perfect, or as near perfect as possible, images in print without colors 'bleeding' into each other. Image setters (computer output device) and screen plate setters (raster image processor) are two of those systems that help in this process.

With the computer output device, the purpose is to expose rolls of film onto a bromide paper to get an image. This produces an exceptional quality black and white image to be used in printing. The range of width normally falls in the one foot to 44 inch range but the resolution is of a very high standard.

IMAGE SETTER

This machine has been overtaken by the raster image processor of late. The raster image processor produces a lithographic style plate which can then be used on an offset printer.

All these forms of producing lithographic plates are for the purpose of printing multiple copies of the same thing. This occurs in the printing and publishing industry and is how we get newspapers with colored photos etc. Before the plates go off to be put on the printing press, they are checked over for errors or mistakes and this is a much easier method than used to be employed many years ago when each page would literally be stamped out with a last that was made up of hand mounted letters. This is what compositors did but is rarely used these days.

There is a long procedure involved in any kind of printing to make sure that all the copy is accurate and that all photos are printed properly. Below are some of the terms used in the printing industry with explanations of what the different terms stand for.

Copy editing is another way to make sure that all the news stories, or information that is about to be published, is accurate and that all the photos or images being used are correct. This is done well before the proof readers get to work and is just one stage in the process before printing begins.

Proof readers check out a facsimile of the finished product before it is mass produced to stop any errors getting into public view. Proofing, on the other hand means that someone makes up an accurate copy of what the finished product will look like so that the proof reader can take a good look at it.

Of course, there are many other processes that take place just to get out, for example, a newspaper. Colored photos have to have a separate plate for each and every color that is to be used. This is why color leaflets or pamphlets are quite expensive. But by doing this, the image turns out crisper and cleaner than computer generated prints which often look fuzzy around the edges.

For those who want to stay with the older form of printing, there are some companies that still provide the traditional form of printed matter. However, cutting edge technology means that this product is getting cheaper by the day.

Tips to Understand the Terms Used in Printing and Newsprint Production

IMAGE SETTER

Thursday, June 30, 2011

Useful Trivia About Offset Printing

An Imagesetter and screen platesetters are essential components for offset printing. It is true that these days the use of laser printers have become extremely popular both at home and in offices. However, this has not diminished the importance of offset printers. The reason for their retention of demand is due to the result that they are capable of achieving. These offset printers can produce high quality prints that can be enlarged to a great extent. The images printed with the help of such printers are very large and can go well over forty inches. The resolution of such prints are extremely high and can even touch something around two thousand four hundred dots per inch. Also, the black of the black and white prints is much darker than what is produced by laser printers.

The process involved in offset printing is quite interesting. It begins with a design that you must provide to the printer. Just like all other designs, even in this case, you may add both text as well as images to your design. Once the design is ready, give it to a reliable printer, as now your job is over and producing a good print entirely depends on the printer. Provide proper instructions and check the material that is used for the prints.

IMAGE SETTER

The offset printers are then used to produce films that may either be positive or negative. On developing the film, which may be produced on a bromide paper or on a photographic one, a high resolution image is produced. In case you find a single colour boring, you need to use a different film for each colour used. Modern technology has gone a step ahead. These days, instead of being transferred onto films, the images are transmitted onto plates. The printing process then begins through the use of plate cylinders. The final print produced by these printers is worth the painstaking process involved.

Offset printers are generally quite expensive. Hence, buying a new offset printer can weigh extremely heavy on your pockets. To keep the expense manageable and within your budget limit, it is a great idea to buy used printers. The best place where you can find refurbished printers is the Internet. There are numerous online stores that sell such printers. Prior to purchasing a printer, acquire some knowledge regarding the various types of printers available. Decide on what exactly you need and then go about searching the online stores. Compare and contrast the various offers made by the stores and their reviews and ratings. It is good if you can get someone to recommend a store.

If you are outsourcing the printing job to a printer, ensure that the printer is a good one. Check for his goodwill and market value. Get references through word of mouth. It is good if you can get hold of some prints that the printer has made previously. This will help you to judge the quality of his work. All said and done, you must remember that whether you create the prints yourself or get someone to do them for you, you must clearly understand what exactly you want and work accordingly.

Useful Trivia About Offset Printing

IMAGE SETTER

Cheap Magazine Printing Secrets Revealed - Ready Versus Run

Understanding the differences between printing make ready and run processes is paramount to grasping the relative strengths and weakness of the the three main production methods for magazine printing: digital, sheet-fed, and heat-set web printing. There is another method used for printing magazines, but it's for very large quantities (more than about 250,000 copies) and will not be discussed here. The knowledge you acquire will aid your quest for purchasing cheap magazine printing.

MAKE READY

IMAGE SETTER

The make ready is everything that must be done to prepare the job for press, up until it's ready to start the actual printing process. It includes, preflighting, ripping and imposing the file, and making and hanging plates on the press, if necessary. All the make ready processes take place in the prepress department, except hanging plates which occurs in the press room.

Preflighting the files is the first step after the magazine printer receives the files. Its purpose is to make sure the files are correct and ready to start the production process by sending the files to the raster image processor (RIP). Enfocus, a leading preflight software provider, conducted a survey in 2008 of over 4,500 printers to determine the most common file errors they experienced from their clients. The results were very similar to files problems documented in a study 15 years earlier. The most common file problems were fonts not embedded in the files, low resolution images, and incorrect color mode images (RGB images supplied instead of CYMK).

Once the files are correct, the prepress technician uses a software program to impose or arrange the file to be printed on the sheet. This accomplishes several tasks. It assures that the correct number of similar images are on a sheet to maximize press efficiency. It assures that after the job is printed, it can be bound properly with the front and backs aligned. Finally, for a magazine, it places the pages in the right location so once the printed sheet is folded into a book, the pages are ordered correctly.

Submitting the correct files to the RIP is the first step in the actual production process. A RIP is either software or firmware that converts the file into a high resolution raster image, also called a bit map. This image is sent to a printing device usually a printer, image setter, or plate maker. The RIP is where the color separation occurs, providing four different plates, one for each of the four colors (CMYK) in a four color process file.

The majority of printers now have computer-to-plate systems which permit them to send the ripped file directly to a plate maker to burn the plates for the press. This increases efficiency by skipping the steps of outputting film to an image setter, stripping four pieces of film (CMYK), and burning the plates manually. In addition to saving time, the computer-to-plate system minimize errors by skipping production steps and increasing automation.

The final step in make ready is hanging the plates on the press which is performed by the press department. The plates usually are made of aluminum, and are bent to conform to the plate cylinder on the press, and secured.

PRESS RUNNING

Once the plates are hung on the press, the paper is loaded in the press, the ink is placed into the ink wells, and the water is balanced, the pressman starts the press slowly to make his registration and color adjustments. This is called the press pull-up. Once the copies are commercially acceptable the pressman starts saving copies, and increases the press speed to its running speed.

Now that you have a basic understanding of the make ready and press running processes, you're well on your way to learning the secrets of cheap magazine printing.

As you probably know, printing unit prices decrease when the number of magazines printed increases. This is true because the make ready costs are distributed over a larger print volume. This is a very important point. The make ready costs are the same for two similar jobs, one that prints 1000 copies and one that prints 5000 copies.

For example, you may want to buy 1000, 16 page magazines for ,100, broken down as 0 for make ready and 0 to run. The total unit cost is ,100/1000 or .10 each. The make ready unit cost is 0/1000 or .90 each and the run unit cost is 0/1000 or .20 each.

Now let's say your magazine was a smashing success, demand has increased and next month you order 5000 magazines. The run charge of .20 each remains constant, and the make ready charge of 0 remains constant, but now it is distributed over a larger quantity, 0/5000. Thus, the make ready unit price drops to .18 each. Therefore, the overall cost is the make ready of 0 (.18 each) plus the run of 00 (.20 each) or 00 total. This reduces the unit cost from .10 each for 1000 magazines to 00/5000 or .38 each for 5000 magazines, or a unit cost percent change of ([.38-.10]/.10) x 100 = -65.5%!

Thinking in terms of make ready and run manufacturing processes and their respective charges will help you understand some of the major advantages that one manufacturing method of magazine printing has over the other and help you secure cheap magazine printing.

Cheap Magazine Printing Secrets Revealed - Ready Versus Run

IMAGE SETTER

Wednesday, June 29, 2011

Understanding the Basic Process of Offset Printing

You may be hearing about this all the time, especially if you are scouting for the right printing company to process your materials. Offset printing is a popular choice among business owners to be used for print ads.

imagesetter

Offset printing or offset lithography uses the idea that oil and water do not mix. If you are curious how it all starts and end, here is an overview of the offset process.

IMAGESETTER

1. The design of the material will, of course, come from you. Whether you are availing the service of a printing company for postcards, catalogs, business cards, posters and the likes, it should start from you.

You can input each element like the design, the text and other details of your materials using software like Microsoft Office Publisher to create the overall look of your project.

You then have to hand that over to your trusted printed company. They can check the material and tweak certain elements to suit your current project.

2. Films are being produced using imagesetter with high resolution. Films can be positives and negatives. This imagesetter is a computer output device that is large format. It can use a photographic paper or a bromide paper and expose the sheets to a laser light source.

After the film or the paper is developed, an image that is of high quality and is in black and white appears.

If you will be using more than one color for your material, a separate film will be needed for every ink to be used.

3. The films are then used to produce printing plates through a photochemical process. During this period, the plates are being exposed to light that has high intensity by using the films. After that, the materials are being treated chemically.

You will then have water absorbent areas that contain no image. This part will repel the ink.

4. There are printing companies that have adapted a modern method when it comes to offset. Instead of an imagesetter, a platesetter is used. This way, from the computer, the image is transferred directly to the plates.

5. Flexible plates are then attached to the plate cylinder that remains moist throughout the process. This way, the ink will only be absorbed by the image areas.

For each press process, the ink image is transferred to a rubber blanket cylinder and then to the paper. Such indirect technique is what defines offset. This rubber blanket balances everything. It preserves the fragile plate. And it adjusts to the texture of the surface of papers.

6. The printing process begins.

You may be knowledgeable with digital printing wherein the process can be accomplished right away. But despite the hassle-free kind of method that the digital technology provides, many business people still choose offset lithography.

Offset is known for its ability to come up with vibrant and closest to real colors. And the materials that have been processed through this will last longer.

Your materials will never go wrong when you have them made through offset printing. Now your only concern is for your project to be handled by the right printing company. And now that you have an overview of how this type of printing works, you will never look at a simple postcard the same way ever again.

Understanding the Basic Process of Offset Printing

IMAGESETTER

Sunday, June 26, 2011

Thermal Vs Inkjet Printing - Which Method is Right For You?

After you have decided whether you should use duplication or replication for your CD or DVD project, the next step is to choose a printing process. For duplication projects (less than 1000 discs) it is most economical to use inkjet printing or thermal printing.

imagesetter

Inkjet Printing:
With inkjet CD printers the ink is sprayed from nozzles onto the CD-R surface. The discs are then sprayed with lacquer to help protect the disc. These produce high resolution print jobs so they are good for printing artwork with fine detail. Although inkjet printers produce high quality print jobs, they also have drawbacks. Some of these include smudging and lack of ability to produce Pantone colors. In addition, the cost per disc varies based on the amount of coverage. The more artwork or text you have to print onto the disc, the more it costs.

IMAGESETTER

Thermal Printing:
Thermal printers use a thin film ribbon inside the printer that applies each color separately onto the re-transfer ribbon. The re-transfer ribbon is then heated, and the entire image is transferred to the disc's surface via a plastic coating that adheres directly to the disc. The result is a smudge proof, scratch proof print. Thermal printing also provides high quality jobs that are an excellent substitution for the more expensive silk screening or offset printing options. With this type of printing, the cost per piece is the same whether you are printing a small amount of text or a full color graphic, although the dub house may offer black-only prints at a discount.

As with all printing methods there are negative aspects to thermal printing. One of these is that small text (10pt. or smaller) is sometimes fuzzy or pixilated. In addition, price per unit of the discs tends to be slightly more expensive than inkjet.

So, if you are looking for a professional way to bring your CD or DVD project to the market but do not need the large volume required for replication, most consumers find that thermal printing is a much better solution to your printing needs. It is slightly more costly, but the result is a high-quality, durable print job that you can be proud to present.

Thermal Vs Inkjet Printing - Which Method is Right For You?

IMAGESETTER